QR Code Scanner
Read any QR code with your camera or by uploading an image. If the code contains a link, you'll see a safety analysis of the destination before you decide to open it — nothing is ever opened automatically.
Point your camera at a QR code. Scanning stops automatically once a code is found.
All decoding happens on your device — scanned images and results never leave your browser.
How this scanner works
The scanner uses the open-source jsQR decoder, running entirely in your browser. With the camera method, each video frame is copied to an off-screen canvas and jsQR looks for the three finder patterns that mark a QR code's corners. Once it locates them, it samples the module grid, undoes the data mask, and runs Reed–Solomon error correction to recover the payload — the same mathematics your phone's built-in scanner uses. Scanning stops automatically the moment a code is decoded, and the camera stream is switched off. With the upload method, your image is drawn to a canvas (scaled so its longest side is at most 1,600 pixels) and decoded the same way. At no point is any frame, image or result transmitted anywhere: there is no server component to this tool at all.
What you do next depends on the payload. If it is a web address, you get a safety analysis (detailed below) and a choice: open the link, or copy it and inspect it somewhere else. If it is anything else — plain text, WiFi credentials, a contact card, a payment string — the decoded text is shown in full so you can copy it exactly as encoded.
Step by step
- Camera: open the Camera tab and choose “Start camera scan”. Your browser will ask for camera permission; allow it, then hold the QR code steady inside the frame. The rear camera is requested automatically on phones. The scan finishes by itself when a code is found.
- Image: open the Upload image tab and pick a photo, screenshot or scan that contains the code. Cropping tightly around the code (while keeping its blank border) gives the most reliable result.
- Review: read the decoded result. For a link, check the destination host and every safety warning before deciding. For text, verify it matches what you expected.
- Act: open the link only if you trust it, or copy the payload for use elsewhere. “Scan again” resets everything and stops the camera.
The URL safety check, exactly
QR codes hide their destination until you scan them, which is why “quishing” (QR phishing) works. This scanner never opens a link for you, and for every URL it runs five concrete checks and shows a warning for each one that triggers:
- URL shorteners — the host is matched against known shorteners (bit.ly, tinyurl.com, t.co, goo.gl, is.gd, buff.ly, ow.ly and short.link, including their subdomains), because a short link hides the real destination until you visit it.
- Not HTTPS — a plain-HTTP destination means anything you type on that page travels unencrypted, so passwords and payment details are at risk.
- Punycode hosts — a host containing
xn--encodes non-Latin characters and may be impersonating a trusted site. - Non-Latin characters — internationalised characters in the domain are a classic lookalike technique, swapping a Latin letter for an identical-looking one from another alphabet.
- Lookalike letter pairs — combinations such as
rn,vv,cl,0oand1lin the host suggest a typosquat domain designed to be misread at a glance.
“Looks clean” means none of these five checks triggered — it is not a guarantee that a site is safe, and a warning is not proof of fraud. Treat the result as evidence, and judge it against context: a short link on a poster from a known business is different from the same link on a sticker covering a parking meter's original code.
Specifications and limits
| Symbology | QR codes only (decoded locally with jsQR) |
| Inputs | Device camera (rear camera preferred on mobile) or an uploaded image file |
| Image handling | Uploaded images are scaled to a maximum of 1,600 px on the longest side before decoding; the original file is not stored or sent anywhere |
| Output | The decoded payload: a URL with host display and safety warnings, or the full decoded text with a copy button |
| Automatic actions | None. Links are never opened, dialled or acted on without your explicit tap |
| Requirements | A browser with camera access (getUserMedia) on a secure (HTTPS) page for camera scanning; image upload works in any modern browser |
Real use cases
- Checking a code before you trust it. A sticker on a parking meter, a code taped to a restaurant window, a “pay here” sign in a car park — scan it here first and read the real destination instead of being taken there blind.
- Proofing your own printed codes. Before a print run of flyers, labels or packaging goes out, scan the proof with this tool and confirm the payload is character-for-character the URL you intended — including the UTM parameters.
- Recovering a link from a photo. A colleague sends a photo of a whiteboard or a conference badge. Upload the image and copy the decoded text instead of retyping a long URL by hand.
- Reading codes on a desktop with no phone handy. Screenshots, emailed codes and codes displayed on another screen all decode from an uploaded image.
Troubleshooting
- Camera permission denied. Allow camera access for this site in your browser settings, or switch to image upload — both methods decode identically.
- No camera found / camera busy. Close other apps or tabs using the camera (video calls are the usual culprit) and try again, or upload a photo instead.
- Code will not decode. Move closer so the code fills more of the frame, steady the device, wipe glare off glossy prints, and make sure the whole code — including the blank quiet zone around it — is in shot. Damaged codes may still decode thanks to error correction, but deep scratches through a finder pattern defeat any scanner.
- The result is not a link. Many codes carry WiFi credentials, contact cards or plain text. The scanner shows the full decoded text so you can use it manually — for a WiFi payload, for example, the network name and password appear after the
S:andP:markers.
Frequently asked questions
- Is this QR scanner private? Where do my scans go?
- Nowhere. Decoding runs entirely in your browser using the jsQR library — the camera frames and any image you upload are processed on your device and are never sent to a server. You can verify this by loading the page, switching your device offline, and scanning: it still works.
- Does the scanner open links automatically?
- No. When a code contains a URL, the scanner shows you the destination host, the full URL, and any safety warnings first. The link only opens if you explicitly tap “Open link”, and you can copy the text instead if you would rather inspect it elsewhere.
- Which code types can this scanner read?
- It reads standard QR codes (the square two-dimensional codes used for links, WiFi credentials, contact cards and payments). It does not decode one-dimensional barcodes such as UPC or EAN — the decoder is QR-only by design, which keeps it fast and accurate for the codes people meet every day.
- Why does it say “No QR code found in this image”?
- The usual causes are a blurry or low-resolution photo, glare across the code, the quiet-zone margin being cropped out, or the code being too small in the frame. Retake the photo straight-on, fill more of the frame with the code, avoid flash reflections, and make sure the full code including its blank border is visible.
- Can I scan a QR code from a screenshot or a photo on my phone?
- Yes. Use the “Upload image” tab and choose the screenshot or photo. The image is scaled down to at most 1,600 pixels on its longest side before decoding, which is still far more detail than a QR decoder needs, and the file never leaves your device.
Related tools
- QR Safety Checker
Inspect a QR code destination for phishing signals such as shorteners and lookalike domains before you visit it.
- Printed QR Tester
Check a printed QR code photo for contrast, quiet-zone and damage problems that stop phones from scanning it.
- QR Splitter & Scanner
Split long content across multiple QR codes and scan multi-part codes back into the original payload.
- URL QR Code Generator
Turn any web address into a downloadable QR code you can print or share.
- WiFi QR Code Generator
Encode a network name and password so guests join WiFi by scanning instead of typing.
- vCard QR Code Generator
Create a QR code that saves your name, phone, email and address straight to a phone address book.
